插丝袜高跟鞋去干网在线,成人免费在线小视频,97无码大牛

Welcome to the official website of Changshu Hongjia Fluoride Technology Co., Ltd!

You Are Here：Home> Product display >Fluoro coating/fluororesin

產(chǎn)品導(dǎo)航

PVDF FR915

PVDF FR915 is a powder like homopolymer of polyvinylidene fluoride with a low melt mass flow rate. It belongs to thermoplastic fluororesin, which is resistant to most chemical media and has excellent properties such as heat resistance, high mechanical strength, high wear resistance, UV and radiation resistance. It can be used as a binder for lithium batteries and as a casting film.

PVDF FR915

1. Product Introduction

FR915 is a powdered vinylidene fluoride homopolymer with a low melt mass flow rate, belonging to thermoplastic fluororesin. This resin is resistant to most chemical media and has excellent properties such as heat resistance, high mechanical strength, high wear resistance, UV resistance and radiation resistance. FR915 can be used as a binder for lithium batteries and for casting films, etc.

This vinylidene fluoride homopolymer starts to decompose slightly above 300℃, producing hydrogen fluoride gas.

2. Product Specifications

Item	Unit	Specification	Test Method
Appearance	/	White powder	/
Rotational Viscosity	/	200~400	0.1g/g NMP
Melt Mass Flow Rate	g/10min	1.0~6.0	ASTM D1238, GB/T 3682 (230℃,12.5kg)
Standard Relative Density	/	1.76~1.77	ASTM D792, GB/T 1033.1
Moisture Content	%	≤0.10	Loss on drying method
Melting Point	℃	162~170	ASTM D3418